The information provided is for general informational purposes only.  This information is based on the author’s personal experience and does not constitute financial or legal advice.  You should consult with a professional and/or conduct your own independent research to verify any information in this post prior to making a financial decision or otherwise.

Make sure your boat functions properly when coming out of winter storage

If you’ve been researching how to get your Bayliner boat ready for spring, you’ve probably run across plenty of spring commissioning advice, but chances are that most of it revolves around de-winterizing the boat’s systems for a successful start to the early boating season.

Sure, you want the engine to fire right up when you turn the key and you want the boat’s systems to work as expected. But an important part of de-winterizing a boat that sometimes gets overlooked is spring commissioning for your safety gear.

Naturally, boating safely year-round is important to all of us. But in the spring there are a few specifics to check as you do your commissioning, because some safety gear expires and some other gear can deteriorate with age. Before you start your springtime boating adventures, use this checklist to ensure that safety remains job number-one.

Check your anchoring gear

Some people don’t think of the anchor and rode as safety-related, but if you lose power and are drifting towards a hazard, being able to anchor in place can save the day. So, make sure the anchor is in good shape and ready to deploy with a strong, reliable rode.

Check the expiration dates on flares

Pyrotechnic visual distress signals expire 42 months from the date of manufacture. Even if you bought flares last year you should still check them, because the time they sit on a store’s shelves prior to purchase counts.

Visually inspect fire extinguishers

The pressure gauge needle should be pointing to green to indicate it’s fully charged, the locking pin should be intact, there should be no visible corrosion or damage to the exterior, and the nozzle should be clear. (Tip: Use a flashlight and peer into the nozzle to make sure it’s clear all the way inside, because bugs will sometimes crawl deep down the nozzle and build a nest in there).

Test your bilge pumps

If your boat has an automatic bilge pump with a switch at the helm, activate it by both the float switch and the helm switch to make sure both systems are functioning properly.

Test the bilge blower, if your boat has one

Outboard owners won’t have to concern themselves with blowers, but if your boat has a stern drive that blower is a critical piece of safety gear (remember to always run it as per the manufacturer’s instructions before starting up the boat).

Check life jackets and throw cushions

Straps, buckles, and zippers can weaken over time, so you need to confirm that all remain in good working order.

Check the supplies in your first aid kit

Whether you’ve used the kit or not it still rates a look, to be sure it didn’t get contaminated by water or otherwise damaged through the off-season.

Boating safely year-round is a top concern for all boaters and paying careful attention to your safety gear is an important part of your bigger de-winterizing checklist. So run through these steps when getting ready for spring then let the boating adventures begin!

 

 This website does not provide financial or legal advice.  The information available on this website is provided for general informational and educational purposes only and is not a substitute for professional advice.  You should consult with the appropriate professionals prior to making any financial decisions.  YOUR USE OR RELIANCE ON ANY OF THE INFORMATION PROVIDED HEREIN IS SOLELY AT YOUR OWN RISK.  UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OR RELIANCE ON ANY INFORMATION PROVIDED.

Cookie Preferences